Q.1.

Extraction of __________ employs an electrolytic process.

Q.2.

Shaving soaps are

Q.3.

The compressive strength of cement should not be less than about 110Kg/cm2 after three days & not less than 170Kg/cm2 after seven days. The fineness of an ordinary cement as determined by turbidimetric method should be about __________ cm2/gm.

Q.4.

Bitterns is a/an

Q.5.

Fat splitting catalyst is

Q.6.

Which of the following is an unsaturated fatty acid ?

Q.7.

The yield of tar from high temperature carbonisation of dry coal is about __________ percent.

Q.8.

Multistage catalytic converter is not used in the

Q.9.

Percentage of alcohol in beer may be around __________ percent.

Q.10.

Permanent hardness of water can be removed by

Q.11.

Naphthalene is removed from coke oven gas by

Q.12.

CaCl(OCl) is the chemical formula of

Q.13.

Dechlorination of treated water is necessary to

Q.14.

Which of the following is not present in bagasse fibre ?

Q.15.

Phthalic anhydride is used

Q.16.

The main product of high temperature carbonisation of coal is

Q.17.

__________ is a thermosetting plastic.

Q.18.

Fire clay is __________ refractory material.

Q.19.

An oil is converted into fat by its

Q.20.

Nitric acid is not used in the manufacture of

Q.21.

Production of one ton of cement requires about __________ tons of limestone.

Q.22.

Naphthols are derivates of

Q.23.

Fermentation is adversely affected by the

Q.24.

Plasticisers are added to synthetic plastics to

Q.25.

Nicotine is

Q.26.

Acrylonitrile is mainly used in the __________ industry.

Q.27.

__________ acid is an unsaturated fatty acid.

Q.28.

Rosin soap is added during paper manufacture to

Q.29.

Separation of fresh water from sea water can be done by the __________ operation.

Q.30.

The enzyme which converts starch into the disacharides maltose is

Q.31.

CO & H2 are the constituents of

Q.32.

Hydrogen gas is not produced commercially (for nitrogeneous fertiliser manufacture) by

Q.33.

Carboxymethyl cellulose (CMC) is added in detergents to

Q.34.

Na2CO3.10H2O is called

Q.35.

Reaction of an alcohol with organic acid is called the __________ reaction.

Q.36.

Nylon-6 as compared to Nylon-is having higher

Q.37.

Fat dispersed in water is exemplified by

Q.38.

Which of the following impurities in feed water for high pressure boiler is the most detrimental ?

Q.39.

Pick out the false statement pertaining to water treatment.

Q.40.

Economics of 'Solvay Process' depends upon the efficiency of

Q.41.

Synthesis gas is a mixture of

Q.42.

Ethanol amine is produced using ammonia and

Q.43.

Digestion of wood-base materials (for manufacture of pulp) is done to

Q.44.

Maleic anhydride is produced by catalytic oxidation of

Q.45.

Which glass is usually used in optical work?

Q.46.

Presence of H2S in raw water (to be chlorinated) results in the

Q.47.

__________ is a thermosetting plastic.

Q.48.

Soap cannot be used with hard water, because

Q.49.

Catalyst used in the oxidation of benzene to produce maleic anhydride is

Q.50.

Fourdrinier machine is used in the manufacture of