Q.1.

The opening provided in sloping roof with its top parallel to the roof surface, is called

Q.2.

The floor is rubbed with oxalic acid, for making its surface

Q.3.

Pick up the correct specification of one-room quarters generally adopted from the following :

Q.4.

An arch may fail due to

Q.5.

In grillage foundations, distance between flanges of grillage beams, is kept

Q.6.

The form work from the sides of beams can be removed only after

Q.7.

The skirting/dado in a bath roof should be upto

Q.8.

Safe bearing capacity of black cotton soil varies from

Q.9.

Pick up the incorrect statement from the following:

Q.10.

The depth of an arch is the distance between

Q.11.

The arrangement of supporting an existing structure by providing supports underneath, is known as

Q.12.

The window which is provided in flat roof of a room, is known

Q.13.

Pick up the correct statement from the following :

Q.14.

An arch constructed with finely dressed stones, is known

Q.15.

The type of ashlar masonry in which stones are finely chisel dressed and thickness of joints does not exceed 3 mm, is

Q.16.

For the construction of flyovers in sandy soils, the type of foundation provided, is

Q.17.

Negative skin friction

Q.18.

Pick up the correct statement from the following :

Q.19.

Herringbone bond is used for

Q.20.

The mortar in which both cement and lime are used as binding materials, is called

Q.21.

The sound which continues even after its source is cut off, is called

Q.22.

In soils possessing low bearing capacity, the type of foundation generally provided, is

Q.23.

The maximum bearing capacity of soil is that of

Q.24.

Crown is located at

Q.25.

Exposed portions of vertical surface at right angles to the door or window frame, are known as

Q.26.

Expansion joints in masonry walls are provided if length exceeds

Q.27.

The process of keeping concrete moist for a certain period after its finishing, is known as

Q.28.

Gravels

Q.29.

Pile foundations are suitable for

Q.30.

Cavity wall is generally provided for

Q.31.

The lower half portion between crown and skew back of the arch, is called

Q.32.

If a is the offset of concrete bed in cms, and d is the depth of concrete bed in cms, then

Q.33.

The type of stone masonry in which stones of same height are laid in layers, is called

Q.34.

In soft clay of low bearing capacity, the type of steel pile generally used, is

Q.35.

A cut in frame of a door to receive the shutter, is called

Q.36.

The rock formed from the solidification of molten matter (magma) is called :

Q.37.

Pick up the incorrect statement from the following :

Q.38.

Which one of the following activities is not correct as applicable to brick corbels

Q.39.

The nominal thickness of an expansion joint in brick walls, is kept more than

Q.40.

To obtain good bonding in brick masonry

Q.41.

The platform at the end of a series of steps, is known as

Q.42.

The inclined surface of an abutment to receive the arch, is known as

Q.43.

A wooden block fixed on back side of a door frame on its post, is known as

Q.44.

The type of bond in which every course contains both headers and stretchers, is called

Q.45.

The range of spread from the wall base to outer edge of a brick work foundation does not exceed

Q.46.

Stability of an existing structure may be disturbed by

Q.47.

The alignment of a cross joint along the plumb line is

Q.48.

The minimum width of a stair in residential buildings, is

Q.49.

Which of the following metal sheets is most effective in preventing dampness ?

Q.50.

Pick up the correct statements from the following :