The nominal thickness of one brick wall in mm, is

Raft foundation are generally preferred to when the area required for individual footing, is more than

Brick nogging type of partition wall, is constructed by

A floor constructed with the 4 to 6 mm marble chips, is known

Pile foundation is generally provided if soil is

According to National Building Code, the hydrants in water mains is provided at minimum interval of

A temporary rigid structure having platforms to enable masons to work at different stages of a building, is known as

The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as

The least bearing capacity of soil is that of

Rotary drilling is the fastest method in case of

The pile which supports the load partly by friction and partly by resting on hard stratum, is called

In high mountaneous region, the type of roof generally recommended for buildings, is

In flat roof of reinforced cement concrete, the recommended angle of slope, is

The vertical faces of a door opening which support frame of the door, are

Pick up the correct statement from the following :

To construct acm thick partition wall, you will prefer

The pile which supports the load due to friction between pile face and surrounding soil, is generally known as

To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as

The sill of a common wooden partition is

Under reamed piles are generally used for

The voussoir placed at crown of an arch, is known as a

The concrete slump recommended for foundations, is

Suitable spacing of timber piles, is

The thickness of a reinforced brick partition wall, is generally kept

The vertical members fixed between steps and hand rail, are known

The minimum thickness of walls built in cement mortar (1 :for a single storey building, is

The members which support covering material of a sloping roof, are

The wedge shaped bricks forming an arch ring, are called

Pick up the consideration to the taken while designing a hospital from the following :

The form work from the slabs excluding props, can be removed only after

An ordinary concrete may be made water proof by adding

A pointed arch which forms isosceles or equilateral triangle, is generally known as

The pile provided with one or more bulles in its vertical shaft, is generally known as

The Auger boring method is not suitable for

The art of bringing the floor to a true level surface by means of screads, is called

If the depth of an excavation ismeters, number of single stage well points to be installed at various levels, is

The concrete slump recommended for beams and slabs; is

Cavity wall is generally provided for

The floor is rubbed with oxalic acid, for making its surface

In verandah (corridor) floors outward slope is

The vertical sides of a door and window openings provided in a wall, are known as

The bearing capacity of a water logged soil can be improved by

The type of arch used for high class buildings where appearance is of prime importance, is known as

The window which projects outside a room of a building for admitting more light and air, is known

Exposed portions of vertical surface at right angles to the door or window frame, are known as

In soils possessing low bearing capacity, the type of foundation generally provided, is

Dutch bond is a modification of

The loose pockets in soil mass can be bridged safely by providing a raft foundation provided the soft area is smaller than

In a colar beam roof

The line of intersection of two surfaces of a sloping roof forming an internal angle less than 180°, is known as