Q.1.

Bitumen felt is used for

Q.2.

To retard the initial setting time of cement, the compound responsible, is

Q.3.

Pick up the correct statement from the following:

Q.4.

Pick up the rock which is not a sedimentary rock from the following:

Q.5.

Distemper is

Q.6.

During smelting process, the combination of fuel in the furnace

Q.7.

Magnese steels

Q.8.

Plywood is normally available

Q.9.

Pick up the correct statement from the following:

Q.10.

Basalt is

Q.11.

Pick up the correct statement from the following:

Q.12.

Red short iron cracks when bent due to the presence of

Q.13.

Which one of the following is used for preparing porcelain

Q.14.

The commonly used base for iron and steel work, is

Q.15.

Spirit varnish generally consists of

Q.16.

The size of mould for bricks, is generally kept

Q.17.

Pig iron obtained from the furnance which is properly provided with fuel at a very high temperature, is called

Q.18.

Percentage content of silica in window glass, is

Q.19.

The coefficient of hardness of stones used in road work should be greater than

Q.20.

The harmonious mixing of the clay ingredients, is known as

Q.21.

Priming consists of

Q.22.

According to ISI, bitumen is classified into

Q.23.

Dorry's testing machine is used for

Q.24.

A rock contains only one mineral. It is called

Q.25.

For a good building stone, its specific gravity should the greater than

Q.26.

Oil varnish generally consists of

Q.27.

Lime stones are generally known as

Q.28.

Pick up the metal refractory from the following:

Q.29.

French polish is

Q.30.

The most commonly used base for timber painting, is

Q.31.

The frog of a brick is normally made on its

Q.32.

The lime which contains high percentage of calcium oxide, is generally called

Q.33.

Linseed oil is used in paints as

Q.34.

Laterite is found in

Q.35.

Pick up the correct statement from the following:

Q.36.

Most commonly used solvent in oil paints, is

Q.37.

Refractory bricks are

Q.38.

Brass is an alloy of

Q.39.

The portion of the brick cut across its width and having its length equal to that of a full brick, is known as

Q.40.

Lime putty

Q.41.

Asbestos

Q.42.

According to IS 399-the weight of the timber is specified at

Q.43.

In stone masonry, if stones are so placed that their layers are parallel to the direction of load, they

Q.44.

Pick up the most favourable condition for the rapid growth of fungus for dry rot from the following:

Q.45.

For construction of structures under water, the type of lime used, is

Q.46.

Plaster of Paris is obtained by calcining

Q.47.

Lacquer is

Q.48.

The tendency of a stone is, to split along:

Q.49.

Acrylic is the name of

Q.50.

Acrylic sheets