Q.1.
Pick up the correct statement from the following:
-
If the bed level is above N.S.L. the canal is called fully in baking and the berms are designed as 3 d where d is full supply depth of water (F.S.D.) -
Area of canal in cutting = BD + Sd2 where B = bed width, d = depth of cutting and S is the side slope -
Area of the bank of canal = B1d1 + Sd2 where B1, d1 and S are the width of bank, height of the bank above N.S.L. and side slope respectively -
If F.S.L. is above N.S.L the canal is called partly in cutting and partly in filling and berms are designed as 2d where d is full supply depth -
All the above.
Q.2.
Pick up the correct statement from the following:
-
Bricks are paid per thousand -
Cement is paid per 50 kg bag -
Lime is paid per quintal -
Brick aggregates is paid per cum -
All the above.
Q.3.
The floor area includes the area of the balcony up to
-
100% -
75% -
50% -
25%
Q.4.
The measurement is made for stone work in square metre in case of
-
Wall facing -
Columns, lintels, copings -
Building work -
Dressed stones in Chajjas -
(a) and (d) of the above.
Q.5.
The following item of earth work is not measured separately.
-
Setting out of works -
Site clearence -
dead men -
Steps in deep exavaction -
All the above.
Q.6.
The weight of an item is measured correct to nearest
-
0.25 kg -
0.50 kg -
0.75 kg -
1.00 kg -
5 kg
Q.7.
The 'centre line method' is specially adopted for estimating
-
Circular buildings -
Hexagonal buildings -
Octagonal buildings -
Other geometrical shaped buildings -
All the above.
Q.8.
The value of 'A' of Indian type W.C. shown in the given figure is : 
-
25 cm -
30 cm -
40 cm -
45 cm
Q.9.
The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is
Q.10.
The cross-section of a road partly in banking and partly in cutting is shown in the given figure. The area of the shaded portion is
Q.11.
The most reliable estimate is
- Detailed estimate
- Preliminary estimate
- Plinth area estimate
- Cube rate estimate
Q.12.
The plinth area of a building not includes
- Area of the walls at the floor level
- Internal shaft for sanitary installations up to 2 sq m. in area
- Lift and wall including landing
- Area of cantilevered porch
Q.13.
Carpet area does not include the area of
- The walls along with doors and other openings
- Bath room and lavatory
- Kitchen and pantry
- None of the above
Q.14.
The measurement is not made in square meters in case of
- P. (Damp proof course)
- Form works
- Concrete Jeffries
- R. Chhajja
Q.15.
The diameter of a domestic sewer pipe laid at gradient 1 inis recommended
- 100 mm
- 150 mm
- 200 mm
- 175 mm
Q.16.
Pick up the item of work not included in the plinth area estimate
- Wall thickness
- Room area
- W' Area
- Courtyard area
Q.17.
While preparing a detailed estimate
- Dimension should be measured correct to 0.01 m
- Area should be measured correct to 0.01 sqm
- Volume should be measured correct to 0.01 cum
- All the above
Q.18.
The order of booking dimensions is
- Length, breadth, height
- Breadth, length, height
- Height, breadth, length
- None of these
Q.19.
The brick work is not measured in cu m in case of
- One or more than one brick wall
- Brick work in arches
- Reinforced brick work
- Half brick wall
Q.20.
The area is measured correct to the nearest
- 0.01 sqm
- 0.02 sqm
- 0.03 sqm
- 0.04 sqm
Q.21.
The measurement is made for stone work in square metre in case of
- Wall facing
- Columns, lintels, copings
- Building work
- (A) and (B) of the above
Q.22.
The measurement is made in square metre in case of
- Cement concrete in foundation
- R. structure
- Hollow concrete block wall
- None of these
Q.23.
The volume is measured correct to the nearest
- 0.01 cum
- 0.02 cum
- 0.03 cum
- 0.04 cum
Q.24.
Pick up the correct statement regarding the centre line method of estimating a building
- Product of the centre line of the walls and area of cross-section of any item, gives total quantity of the item
- The centre line is worked out separately for different sections of walls of a building
- The centre line length is reduced by half the layer of main wall joining the partition wall
- All the above
Q.25.
The expected out turn of half brick partition wall per mason per day is
- 1.5 m2
- 2.0 m2
- 4.0 m2
- 5.0 m2
Q.26.
The expected out turn ofmm plastering with cement mortar is
- 2.5 sq m
- 4.0 sq m
- 6.0 sq m
- 8.0 sq m
Q.27.
The inspection pit or chamber is a manhole provided in a base drainage system
- At every change of direction
- At every change of gradient
- At every 30 m intervals
- All the above
Q.28.
The concrete work for the following part of the building of specified thickness is measured in square meters
- Root slabs
- Floors
- Wall panels
- All the above
Q.29.
Pick up the incorrect statement regarding a master trap from the following:
- It is provided in between the lower end of the house drain and the street sewer
- It is provided a cleaning eye at the top of the trap
- The mica flap valve which opens inwards only, is fitted at the top of the inlet pipe
- The water seal is less than that of ordinary traps
Q.30.
A cement concrete road ism long, 8 m wide andcm thick over the sub-base ofcm thick gravel. The box cutting in road crust is
- 500 m3
- 1000 m3
- 1500 m3
- 2000 m3