One output structure of a TTL gate is often referred to as a ________.

Which equation is correct?

Which is not part of emitter-coupled logic (ECL)?

A certain gate draws 1.8 A when its output is HIGH and 3.3 µA when its output is LOW. V_CC is 5 V and the gate is operated on a 50% duty cycle. What is the average power dissipation (P_D)?

The greater the propagation delay, the ________.

A pull-down resistor must be used with open-collector TTL circuits.

The speed-power product provides a basis for the comparison of logic circuits when power dissipation and propagation delay are important considerations in the selection of the type of logic to be used.

Metal-oxide semiconductor field-effect transistors (MOSFETs) are the active switching elements in CMOS circuits.

There are four different logic level ranges for TTL and CMOS: V_IL, V_IH, V_OL, and V_OH.

ECL IC technology is faster than TTL technology.

Power dissipation is a measure of a circuit's noise immunity.

The total sink current decreases with an increase in each load gate input.

CMOS is a more dominant IC technology than TTL.

Unused TTL inputs should be tied LOW.

The greater the propagation delay, the higher the maximum frequency.