A distraction when driving is anything that takes your attention away from driving. Driver distractions may occur anytime and anywhere. Distracted driving can cause collisions, resulting in property damage, injury, and death.

Being under the influence of alcohol affects your judgment. Good judgement is necessary to react appropriately to things that you see or hear while on the road. Even if you are below the legal blood alcohol limit, consuming any amount of alcohol is likely to affect your ability to drive safely.

Warning signs are usually yellow with black markings. This sign indicates that there could be traffic merging from the right, so drivers should prepare to allow traffic to safely merge.

Regulatory signs provide notice to road users of traffic laws that must be obeyed. This particular sign tells you the maximum speed limit for the stretch of highway where it is posted. You may drive more slowly than the posted speed limit, based on road conditions, but it is illegal to drive any faster than the posted speed limit.

Keep a space between your vehicle and parked vehicles. A person may step out of a parked vehicle or out from between the parked vehicles without looking. A driver may begin moving their vehicle before realizing you are there.

Use low beam headlights when driving in rain, snow, sleet, or fog. High beam headlights in adverse weather conditions lower visibility by reflecting off the precipitation and back into the driver's eyes.

Excessive speed is one of the most common contributing factors to vehicle crashes. Excessive speed does not save time and often leads to high-risk decision-making.

Warning signs are usually yellow with black markings. This sign indicates that a divided highway is beginning and cars should keep to the right.

When making any turn, turn from the lane closest to the direction you wish to travel into the first available legal lane. If you are making a left turn from a one-way street, this means that you would make the turn from the lane nearest to the left curb.

Instructions given by police officers directing traffic always override posted traffic signals and signs. Follow the officer's instructions.

Solid yellow lines on two-lane roads indicate zones where passing is prohibited. If a solid yellow line appears next to a broken yellow line, drivers in the lane nearest to the solid yellow line may not pass. In some instances, both yellow lines will be solid, indicating that it is not safe to pass from either direction.

This sign warns of a dangerous downgrade or hill ahead. The hill may be very long or steep, or it may have sharp curves.

This orange warning sign tells drivers that an area of roadwork is upcoming. When traveling through a work zone, stay alert for temporary traffic control devices.

To stay aware of hazards, you should scan the road and check your rearview mirrors every two to five seconds. Constantly staring at just the road ahead of you is dangerous. If you must drive in foggy conditions, you should use your low beam headlights, not your high beam headlights.

While driving, you should remain aware of the actions of surrounding drivers. If you notice an aggressive driver nearby making erratic or improper lane changes, you should not challenge them. The safest way to handle an aggressive driver is to get out of their way.

It is important to remember that driving is a privilege and that all drivers play a role in ensuring that everyone remains safe on the roadways. If you prove to be abusive of that privilege, the privilege may be revoked.

Only the passage of time can remove alcohol and its impairing effects from the body.

Warning signs are usually yellow with black markings. This sign warns that the divided highway ends ahead. Prepare to change lanes or shift lane position.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers about the presence of traffic signals at an intersection ahead.

This sign indicates that the road ahead may be slippery when wet.

Treat a flashing red traffic signal the same as you would treat a stop sign. Come to a complete stop, yield to oncoming traffic or pedestrians, and proceed when the way is clear.

A white rectangular sign indicates that you must obey the stated rule. This sign means that drivers should not pass other vehicles for any reason.

The posted maximum speed limit is the fastest legal speed you can travel on a road under ideal conditions. It is safest to drive at the same speed as surrounding traffic, up to the maximum speed limit. Maintaining a safe speed at all times is a responsibility shared by all motorists.

It is necessary to follow farther behind a large truck than you would if following a passenger vehicle because trucks have larger blind spots.

Warning signs are usually yellow with black markings. This sign warns that merging traffic will be entering from the right, so drivers should prepare to allow the incoming traffic to safely merge.

This sign indicates parking spaces that are reserved for vehicles displaying Persons with Disabilities license plates, Disabled Veteran license plates, and/or disabled parking placards.

Drivers of trucks, buses, vans, and any vehicles pulling campers or trailers may not be able to see you if you are driving directly behind them. Increase your following distance when driving behind one of these vehicles. Additionally, large vehicles can block your view of the road, so increase your following distance to look around the sides of the vehicle and see the road ahead.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns that you are leaving a separated one-way highway and will soon be driving on a two-way highway.

If your vehicle leaves the roadway, hold the steering wheel firmly, release the gas pedal, and gently apply the brakes. Wait until your speed has reduced, check the traffic, and look for a place to safely return to the roadway by merging back into traffic. Overcompensating by jerking the wheel to return to the roadway can cause you to lose control of your vehicle or may cause your car to go into other lanes of traffic.

This sign is posted on one-way streets and other roadways where a driver is not allowed to enter. A driver may see this sign if attempting to enter an expressway ramp in the wrong direction.

A warning sign is usually yellow with black markings. This sign warns that the number of lanes ahead is reduced and that traffic will need to merge to the left.

Slow-moving vehicles, such as farm tractors, road maintenance vehicles, and animal-drawn carts, display an orange and red triangle on the back.

A round yellow sign indicates that there is a railroad crossing ahead.

An octagonal sign always means stop. When approaching a stop sign, you must come to a complete stop at the marked stop line and proceed only when it is safe to do so. If there is no stop line, stop before the crosswalk. If there is no crosswalk, stop before the intersection at a point from which you can see any oncoming traffic.

This sign indicates that the road may be slippery when wet. Exercise caution when driving on a slippery road.

If your vehicle has a two-part seat belt system, be sure to wear both the lap belt and the shoulder belt. Wearing either part alone greatly reduces your protection. If you have an automatic shoulder belt, be sure to buckle your lap belt as well.

A round sign means you are approaching a railroad crossing. This sign is posted a few hundred feet in front of the tracks and tells drivers to slow down, look, listen, and prepare to stop.

At a stop sign, you must come to a full stop and check for traffic in all directions before proceeding.

A pennant-shaped sign marks the beginning of a no passing zone.

Every 0.02 percent increase in blood alcohol concentration nearly doubles a driver's risk of being in a fatal crash.