Flashing red lights are used at dangerous intersections. Treat them like stop signs.

On the roadway, bicyclists must ride single file. They may ride two abreast on a bicycle lane or path if it is wide enough that doing so will not impede traffic.

Every driving situation involves three basic elements: the environment, the vehicle, and the driver. Of these three elements, only you as a driver have the ability to gather information about the existing situation. Apply your skills, knowledge, experience, and judgment, and take any action required to safely complete the driving task.

When you park on a downward-facing slope, turn your wheels sharply toward the side of the road. This way, if your vehicle starts to roll downhill, it will roll away from traffic.

You must stop at a railroad crossing when directed to do so by a flagger, stop sign, or warning devices, such as gates or flashing lights. Not all railroad crossings are equipped with such devices. It is against the law to drive around lowered railroad crossing gates.

A solid red arrow in a traffic signal means the same thing as a circular red traffic light. When an arrow is red, traffic in the indicated lane must stop and may not turn in the direction that the arrow is pointing.

This sign indicates that left turns are prohibited.

This sign (with the arrow below) indicates the location of a bicycle crossing/path. Drive with caution around this sign because bicycles likely regularly cross or ride beside traffic in the area.

You should not permit passengers to ride in trailers. Riding in trailers of any kind is prohibited.

When preparing to drive, you should first adjust your seat to ensure that you are in a comfortable position and can see the road clearly. Adjust your mirrors and steering wheel to be effective when your seat is fully adjusted.

If your loaded trailer weighs more than half the weight of the towing vehicle, or is 3,000 pounds or more, the trailer must be equipped with brakes and breakaway protection.

The faster you drive, the smaller your field of vision becomes. As your speed increases and your field of vision decreases, you must be extra alert to potential hazards.

An arrow painted on the pavement within a traffic lane indicates that drivers in the lane must make the movement indicated by the arrow. Drivers should follow directions given by any traffic signs or signals before proceeding in the direction indicated by the arrow.

The only way to be sure you will have enough time to react to mistakes made by other drivers is to leave plenty of space between you and the vehicles around you.

Whenever you change your address, you must provide the county examiner of drivers with your new address, your name, and driver license number. This must be done in writing and within 30 days of the change. A change of name requires you to appear in person at the appropriate office within 30 days with proof of the change.

You may not be able to drive well if you are worried, excited, crying, angry, or depressed. Emotions can distract you from your driving because your mind is focused on something else. Take time to calm down and get focused before driving.

Bicycles are legally considered vehicles with the same rights and responsibilities as other vehicles. Look for and yield to bicyclists when crossing bike lanes. When driving a motor vehicle, give bicyclists plenty of space.

Curve and turn warning signs often have attached advisory speed signs that show a recommended driving speed for drivers in the curves and turns. Although a driver may feel comfortable driving at a higher speed in fair weather, they should never do so under rainy, snowy, or icy conditions.

This sign indicates that right turns are prohibited.

Warning signs prepare drivers for upcoming road conditions and hazards and are usually yellow and black. This sign tells drivers that a lane is ending and that they should prepare to allow traffic to merge safely.

High speeds greatly increase stopping distances and severity of crashes. The faster you drive, the greater the impact or striking power of your vehicle, should you be involved in a collision.

Five-sided signs indicate there is a school nearby and drivers should be alert to children and pedestrians in or near the road. This sign can indicate either a school crossing or a school zone.

After a minor collision, move your vehicle off the traveled portion of the roadway, if possible. Do not leave the scene of an accident without identifying yourself and rendering assistance.

When driving an unfamiliar vehicle, take a few minutes before driving to familiarize yourself with the location and operation of the turn signals, hazard warning signals, headlights and beam selector, windshield wipers and washers, brakes, gear selector, and horn. Any defects should be corrected before the vehicle is driven.

On narrow roads, you must allow vehicles traveling in the opposite direction at least one-half of the main-traveled portion of the road. Both vehicles must have adequate space in order for the drivers to safely pass one another.

A steady yellow traffic light indicates that a red light is about to appear. Stop unless you are already within the intersection.

Signals must be given for at least 100 feet before changing lanes or turning. This is approximately the length of five cars. It is advisable to signal for a greater distance when driving at higher speeds.

Regulation signs regulate traffic speed and movement, displaying rules which drivers must obey. This regulation sign means that right turns are prohibited.

Your ability to handle dangerous traffic situations depends largely on searching for and identifying problems before meeting them. Looking far ahead of your vehicle does not mean you should simply stare at the center of the road. You need to continually scan the entire road, including the sides of the road.

Yellow centerlines are used to separate traffic moving in opposite directions. Broken lines may be crossed to pass slower-moving traffic when it is safe to do so.