If confronted by an aggressive driver, it is most important to get out of their way, if possible. Do not make eye contact with the driver, as doing so could provoke them. Do not let them provoke you with their actions.

At bus stops, drivers should warn passengers about potential hazards. This may include warning them to watch their step when exiting the bus by way of lowered stairways.

To avoid a loss of control, you should accelerate slowly when driving in poor-traction conditions, such as rain or snow.

When driving a bus, you should be mindful of the size of the gap that your vehicle will need to merge into traffic after making a stop. Wait for a gap of the necessary size to open in passing traffic before re-entering the main road.

When backing, you should pull forward to reposition your vehicle whenever needed. Drift should be corrected immediately by turning the steering wheel in the direction of the drift.

For safe operation, a commercial motor vehicle needs a tread depth of 4/32 of an inch in every major groove on the front tires, and a tread depth of 2/32 of an inch on other tires.

A vehicle will be slowed down by gravity on any uphill grade. You may need to switch to a lower gear to climb a steep grade.

Bridges tend to freeze before other parts of the road surface. You should be especially careful on bridges when temperatures are near the freezing point.

Bridges tend to freeze before other parts of the roadway. Be particularly careful on bridges when temperatures are close to the freezing point.

Distracted drivers perceive hazards on the road more slowly than drivers who are focused, or they do not perceive hazards at all.

You should start and stop as smoothly as possible to help prevent passenger injury. After passengers have boarded your bus at a stop, you should allow them time to be seated or to brace themselves before you begin driving.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.

Splitting driving responsibilities with a second driver lowers the chance that either of you will drive while fatigued. You can also reduce the risk of fatigue by avoiding heavy foods and keeping the interior of the cab cool.

The heavier a vehicle is, the more the brakes will need to work to bring the vehicle to a complete stop.

During the vehicle inspection test, you will be required to do a complete inspection of your vehicle. During this inspection, you must explain to the examiner what you are inspecting and why you are inspecting those items.

Stopping is not always the best way to avoid a hazard. If there is not enough space for you to stop to avoid coming into contact with the hazard, swerving out of the way may be your safest option.

You will be asked to change lanes during the on-road driving test. When the examiner asks you to do this, you should make the necessary traffic checks and use the proper signals before changing lanes.

When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.

During the on-road driving test, do not stop, change gears, pass another vehicle, or change lanes while any part of your vehicle is in a railroad crossing.

Bus drivers should not engage in conversation with passengers, fuel a bus inside an enclosed building, or tow or push a disabled bus with riders aboard the vehicle. These are all considered to be prohibited practices.