Passing on a two-lane, two-way road requires good judgment because you must use the lane belonging to oncoming traffic to complete your pass. Only pass if you may safely and legally do so.

The exhaust system helps remove toxic gases, reduce the noise, and cool the hot gases coming from a running engine. Fumes from a leaky exhaust system can cause death in a very short time. They can also make you drowsy while driving.

Arrows may be used to indicate which lanes should be used for specific purposes, such as driving straight or making a turn.

When approaching a railroad crossing, you must stop your vehicle no closer than 15 feet from the nearest rail if an installed electric or mechanical signal is giving warning of an approaching train. Be aware of other warning signs that may indicate an oncoming train, including seeing a lowered crossing gate or hearing an oncoming train.

Stop lines are solid white lines painted across traffic lanes at intersections and pedestrian crosswalks. They indicate the exact location at which approaching drivers must stop.

It is important that you are able to see clearly through all of your vehicle's windows, including the windshield. Remove all snow, ice, and frost from your vehicle's windows and mirrors before you start to drive.

Orange, diamond-shaped signs are used to mark construction, maintenance, survey, and utility work areas. These signs help direct drivers and pedestrians safely through dangerous zones. Fines for traffic convictions may double in areas marked by these signs.

You may drive more slowly than the posted speed limit, based on road conditions, but it is illegal to drive any faster than the posted speed limit. Some conditions which require reduced speed for safety include approaching curves or hills where visibility is limited, driving on slippery roads, and driving on roads where animals and pedestrians are present.

Tailgating is a common behavior that can lead to aggressive driving, and so it should be avoided. Drivers may face legal consequences for driving unsafely.

This sign marks a one-way road, entrance, or exit. If you are facing this sign, traffic is coming toward you. Turn around if you are driving toward this sign.

White lines separate lanes of traffic that are moving in the same direction. Dashed white lines may be crossed to pass or change lanes, if it is safe to do so.

"Reduced speed" signs inform drivers that they must reduce their speeds. If a new speed limit is posted on one of these signs, the new speed limit begins at the sign.

This sign indicates that a stop sign is ahead.

Drivers must always yield the right-of-way to pedestrians in the roadway, even if there is not a marked crosswalk.

You must stop at a railroad crossing when directed to do so by a flagger, stop sign, or warning signal. Use caution when driving near railroad tracks.

Always be prepared to yield to any oncoming trains before crossing railroad tracks, particularly if there are no lights or gates controlling the crossing. Never start to cross the tracks until there is room for your entire vehicle on the other side of the tracks. Due to the risk of a vehicle stalling, it is not wise to shift gears when crossing railroad tracks.

This advisory speed sign indicates the maximum safe speed for a highway exit (in this example, 30 mph).

Before changing lanes, check your side and rearview mirrors for traffic approaching you from behind. Use your turn signal to let other drivers know you plan to change lanes. Check for other drivers who also may be moving into the same lane.

Your ability to handle dangerous traffic situations depends largely on searching for and identifying problems before meeting them. Looking far ahead of your vehicle does not mean you should simply stare at the center of the road. You need to continually scan the entire road, including the sides of the road.

Be prepared to reduce your speed and use caution when directed to do so by a sign, flagger, or law enforcement officer. Failure to do so is illegal and is dangerous to those working in construction zones.

Blue signs on the roadway are service signs. They are used to provide information about motorist services, such as upcoming rest areas, food options, or nearby hospitals.

When you meet a school bus that is displaying flashing amber lights, you must drive no faster than 20 mph and be prepared to stop. You may not pass a school bus when its amber lights are flashing.

You should always slow down when driving on narrow or winding roads, near intersections, near railroad crossings, on hills, in sharp or blind curves, where there are pedestrians or driving hazards, and when the roads are wet or slippery.

You may proceed in the direction that a green arrow signal is pointing if you are in the proper lane, regardless of any other signals that are displayed. Before turning, you must yield the right-of-way to pedestrians and vehicles already within the intersection.

A parking space marked by a "Reserved Parking for Persons with Disabilities" sign may only be used by vehicles that display Persons with Disabilities license plates, Disabled Veteran license plates, and/or disabled parking placards.

When you are turning left from a two-way street, begin in the lane closest to the centerline and start your turn just before the front of your car reaches the center of the intersection. Do not cut the corner. Steering hand-over-hand, turn into the first available legal lane.

Drugs (including illegal, prescription, and over-the-counter medications) can affect your brain function and impair your ability to drive safely. Combining alcohol with other drugs will increase the risk of a crash.

A steady green light means you may drive through the intersection if the road is clear. You may also turn right or left on a steady green light unless a sign prohibits the turn. When turning, you must yield to other vehicles and pedestrians within the intersection.

This orange warning sign tells drivers that an area of roadwork is upcoming. When traveling through a work zone, stay alert for temporary traffic control devices.

This sign is used with a traffic signal to tell drivers that left-turning traffic does not have the right-of-way and must instead wait for oncoming traffic to clear.

Regulation signs regulate traffic speed and movement, displaying rules which drivers must obey. This regulation sign indicates that drivers should keep right to avoid an upcoming potential driving hazard.

If an oncoming driver fails to dim their headlights, look toward the right side of the road. This will keep you from being blinded by the other vehicle’s headlights and allow you to see enough of the road to stay on course. Do not try to retaliate by keeping your bright lights on.

When entering any roadway, you must be aware of traffic conditions. Use your side mirror and look over your shoulder to help you see and anticipate traffic when entering a freeway.

Regulation signs regulate traffic speed and movement, displaying rules which drivers must obey. This regulation sign indicates that drivers turning left at a green light must yield to oncoming traffic and may complete the turn when it is safe to do so.

Work zones on highways have become increasingly dangerous places for both workers and drivers. When approaching a work zone, watch for materials such as cones, barrels, signs, large vehicles, and workers in brightly colored vests to warn you and direct you.