There are several strategies you can use to prevent someone from riding their motorcycle while impaired. You can arrange another way for them to get home, involve them in other activities to slow the pace of their drinking, use any available excuse to stop them from leaving before they are sober, and get other friends involved to intervene as a group.

The front brake of a motorcycle is more powerful than the rear one, providing at least 70 percent of the total stopping power. Always use both brakes any time you slow or stop.

The front brake of a motorcycle is more powerful than the rear brake. It can provide at least three-quarters of the motorcycle's total stopping power.

When traveling in a group, it is never recommended for motorcyclists to ride in pairs. Neither rider will have adequate room to maneuver to avoid hazards.

A staggered formation is the best way to keep ranks close while still maintaining an adequate space cushion for all riders. Ride in a single-file line when riding in curves, turning, or entering or leaving a highway. Never ride side-by-side with another rider.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. Use your high beam headlight, except when following or meeting another vehicle.

When riding on slippery surfaces, you should reduce your speed. Make certain to use both brakes when braking and avoid making sudden moves.

Before every ride, you should check your motorcycle's tires, controls, chains, sprockets, shock absorbers, fasteners, and brakes. A small mechanical issue on a motorcycle can be extremely dangerous in traffic.

If you need to stop quickly, you should apply both brakes at the same time.

Open up your following distance if your motorcycle will require a longer distance than normal to stop. Additionally, if you are riding in heavy traffic or if you cannot see through the vehicle in front of you, you should also increase your following distance.

While a staggered formation is generally recommended, riders in a group should move into a single-file formation when taking curves, taking turns, entering a highway, or leaving a highway.

You should not rely on eye contact to guarantee that a driver will yield to you. It is not uncommon for a driver to look directly at a motorcyclist and still fail to actually notice them.

Taking a turn too fast is dangerous. If you cannot hold the turn, you may end up turning into another lane or even off of the road entirely. Use caution when taking a turn.

When riding at night, use your high beam (unless you are following or meeting another car), take advantage of the headlights of other vehicles, and wear reflective materials to increase your visibility. You should always be flexible about your lane position, selecting whichever position will help you to see, be seen, and have an adequate space cushion.

In general, there is no single best lane position. No portion of the lane need be avoided at all times. Position yourself in the portion of the lane where you are most likely to be seen and you can maintain a cushion of space around you.

The front brake is safe to use as long as it is used properly. The front brake of a motorcycle is more powerful than the rear brake, providing at least three-fourths of the total stopping power.

Passengers should lean as the operator leans. A passenger should sit as far forward as they can without crowding the operator and hold firmly onto the operator's waist, hips, or belt.

To maximize your chances of being seen by other road users, you should wear brightly-colored clothing with reflective materials, use your headlight at all times, and use your signals and brake light properly.

No matter the speed, riders who are not wearing helmets are three times more likely to die from head injuries than riders who are wearing helmets at the time of a crash.

Passengers should get on a motorcycle only after the engine has been started and the transmission is put in neutral. They should sit as far forward as possible without hindering the operator's control of the motorcycle and should hold onto the operator's waist, hips, or belt.

Always look through turns to where you want to go, turning only your head and not your shoulders. Your arms should be slightly bent when holding the handgrips and you should keep your knees against the gas tank to help maintain your balance. Actively search for hazards on the road ahead, but also behind and to the sides of your motorcycle.

When making a turn, you should look through the turn to where you want to go. Turn just your head, not your shoulders, and keep your eyes level with the horizon.

Any approved helmet will allow a rider to see as far to the sides as is necessary for safe riding. Approved helmets will have labels and markings providing the manufacturer's name, relevant information and instructions, and information about the standards the helmet meets.

Because you need adequate traction to swerve safely, you should not brake and swerve at the same time. Instead, if you approach a hazard that requires you to brake and swerve, you should perform one action and then the other.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night. Use your high beam headlight setting when you are not following or approaching other vehicles.