Roll on the throttle through a turn to stabilize your suspension. Maintain a steady speed or accelerate gradually through the turn.

To maintain proper balance, your feet should be placed firmly on the footrests and not dragged on the ground. Do not point your toes downward, as this may cause them to catch on the road. Keep your feet near the controls so you can reach them quickly, if needed.

When approaching a potentially dangerous area, such as an intersection, you should cover the clutch lever and both brakes in order to reduce the amount of time you will need to react to any hazards.

The gearshift lever of a motorcycle is located in front of the left footrest and is operated by the rider's left foot.

In general, it is safest to simply proceed straight in your lane when crossing angled railroad tracks. Turning to approach tracks at a right angle can be dangerous because it may send you traveling into another lane.

If your rear tire fails, the back of your motorcycle will likely jerk from side to side. It is rare for motorcyclists to actually hear a tire fail.

Before every ride, be sure to check your tires' inflation pressure, your tires' treadwear, and the general condition of the sidewalls and tread surface on the tires.

If you are unable avoid an obstacle and must instead ride over it, slow down and approach the obstacle at as close to a 90-degree angle as possible. Keep your motorcycle straight up and down, if possible. Just before contact, roll off the throttle slightly to lighten the front end of the motorcycle.

In a group, less experienced riders should ride toward the front, just behind the leader, so more experienced riders can easily watch them.

You are especially vulnerable as a motorcyclist, so it is very important to use your turn signals to alert others to your intentions. Always use them any time that you plan to change lanes or turn, even if you don't think anyone else is nearby.

Do everything you safely can to avoid hitting an animal in the road. If you are in traffic, however, you should remain in your lane. Swerving into another lane of traffic to avoid hitting an animal can cause you to collide with another driver. Hitting something small is less dangerous than hitting something big.

High-quality rain suits designed for motorcycle riding will resist tearing and ballooning when a rider travels at high speeds.

When riding in a group, inexperienced riders should ride just behind the leader near the front of the group. This allows more experienced riders to keep an eye on them from the back of the group.

In Oregon, it is illegal for motorcycles and mopeds to pass between two moving vehicles on a multilane highway or one-way street.

Do not try to accelerate out of a wobble because doing so will only make the motorcycle more unstable. Instead, grip the handlebars firmly, slow down by gradually closing the throttle, move your weight as far forward and downward as possible, and pull off the road as soon as you can. Avoid applying the brakes, as this may also worsen the wobble.

Crossing rain grooves or bridge gratings may cause your motorcycle to move in a weaving motion. This is usually not dangerous, so simply relax and proceed across the surface at a steady speed. Trying to ride at an angle to compensate for the weave is dangerous because it forces you to zigzag to stay in your lane.

To reduce your risk of being involved in a crash, you should remain alert and ready to react to any hazard. Identify hazards and decide the order in which you need to address the hazards. Always use your headlight to make yourself more visible and maintain an adequate space cushion around your motorcycle at all times.

To brake, squeeze the front brake lever and press down on the rear brake pedal. Always use both brakes when slowing or stopping.

Trying to accelerate out of a wobble is dangerous and will only make your motorcycle more unstable. Instead, grip the handlebars firmly (without trying to fight the wobble), gradually close the throttle to slow down, and move your weight as far forward and downward as possible. Pull off the road as soon as you can.

Strategies for safely riding at night include reducing your speed, increasing your following distance, using the lights of the car ahead to help see farther down the road, using your high beam headlight (unless following or meeting another vehicle), and being flexible about your lane position.

A motorcycle has blind spots just like any other vehicle. A rider must always turn their head to check for traffic before changing lanes.

On a two-lane highway, a group of riders should pass another vehicle one at a time. The second rider should not begin to pass until the first rider has safely re-entered the original lane. Riders should continue in this pattern until they have all safely passed the vehicle.

When preparing to pass another vehicle on its left, you should ride in the left portion of the lane to increase your line of sight and make yourself more visible to oncoming traffic.

More than half of all motorcycle crashes involve riders with less than six months of experience on the motorcycle being used.

Always use the proper turn signal before a turn or lane change. Use your mirrors and perform head checks before changing lanes to check for traffic surrounding your vehicle.