You should slow down when driving a school bus in high winds. Keep a strong grip on the steering wheel and try to anticipate gusts.

When exiting your vehicle during the basic vehicle control skills test, you must face the vehicle and maintain three points of contact at all times. If your testing vehicle is a bus, you must maintain contact with the handrail. Exiting the vehicle incorrectly may result in automatic failure of the basic control skills test.

When inspecting a trailer coupling, you should make sure the fifth wheel locking jaws are closed around the shank of the kingpin, not the head of the kingpin.

The adjustment of all mirrors on a school bus should always be checked before the bus is driven.

Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

The mirrors of a bus should always be inspected before a trip. Adjust them as necessary before beginning to drive.

The outside right and left side convex mirrors on a school bus should be positioned so that the driver can see the fronts of the rear tires touching the ground; each side of the bus up to the mirror mounts; and at least one traffic lane on either side of the bus.

During the pre-trip vehicle inspection test, you will be asked to indicate where the power steering fluid dipstick or reservoir sight glass is located. You will need to show that the power steering fluid is within a safe operating range.

Maneuvers that may be included in the basic vehicle control skills test include straight line backing, offset back/right parking, offset back/left parking, driver side parallel parking, conventional parallel parking, and alley docking.

Students should board a school bus slowly in a single-file line while using the handrail.

A school bus driver should not change the location of a stop without written approval from appropriate school district officials.

While students are boarding a school bus, the driver should supervise the loading while watching all mirrors for any students running to catch the bus.

While students are boarding a school bus, if the driver cannot account for a student outside, they should secure the bus, take the key with them, and check around and underneath the bus.

On a school bus, outside convex mirrors should be adjusted to allow the driver to see at least one traffic lane on either side of the bus; the entire side of the bus up to the mirror mounts; and where the front of each rear tire touches the ground.

Proper mirror adjustment is vital to the safe operation of a school bus. A bus's flat mirrors should be adjusted so the driver is able to see 200 feet, or four bus lengths, behind the bus.

A school bus driver should always approach bus stops slowly and cautiously.

During unloading, if a school bus driver cannot account for a student outside of the bus, they should secure the bus and check for the missing student around and underneath the bus.

The danger zones of a school bus are areas in which children are most likely to be hit, either by another vehicle or by the bus itself. Such areas are located to the front, sides, and rear of a bus.

While students are boarding a school bus, if the driver cannot account for a student outside, they should secure the bus, take the key with them, and check around and underneath the bus for the missing student.

It is critical to the safe operation of a school bus that mirrors be properly adjusted. Always check each mirror before operating the bus.