You should use low beam headlights when driving in fog, rain, or snow.

A truck or bus has blind spots on each side, in the rear, and in the front. An automobile cannot be seen in these blind spots. These blind spots are referred to as the “No zone.”

This sign indicates the presence of a pedestrian crossing. Drivers should be cautious when driving where pedestrians may be present.

It is not always easy to maintain a safe distance behind your vehicle. However, you can help keep the driver behind you a safe distance away from your vehicle by maintaining a steady speed and signaling turns, lane changes, and deceleration in advance.

Watch for any pedestrian who may cross your path. If you see pedestrians near the road where you are driving, slow down and be prepared to stop, if necessary.

Allow for extra space when driving behind a motorcycle. Motorcycles can stop more quickly than other vehicles can and you must have adequate room to stop if the motorcyclist brakes or falls off. Also, remember that motorcycles are difficult to see at night because they only have one tail light.

Warning signs are usually yellow with black markings. They alert you to conditions that are immediately ahead. This sign warns drivers that another road crosses the highway ahead.

This sign indicates a low ground railroad crossing. Where this sign is present, railroad tracks cross the road at a steep slope and the bottom of low vehicles may drag or get caught on the tracks.

Persons who are upset, angry, or otherwise distracted by their emotions should take time to cool off before driving a car. Taking out frustrations or anger while driving is exercising very poor judgment and is very dangerous to both the driver and others on the road.

It is important that you are able to see clearly through all of your vehicle's windows, including the windshield. Remove all snow, ice, and frost from your vehicle's windows and mirrors before you start to drive.

A flashing red traffic light means the same thing as a stop sign. You must come to a complete stop, yield to other traffic and pedestrians, and then proceed when it safe to do so.

You must turn on your headlights any time conditions prevent you from seeing other vehicles. Other drivers may have trouble seeing you, too.

This sign indicates that an intersection with a crossing road is ahead.

Reducing your speed should be your first response to decreased visibility and dangerous road conditions.

It is prohibited to stop, stand, or park on a railroad track. You should never cross railroad tracks unless there is room for your entire vehicle on the other side of tracks.

Defensive driving is using safe driving strategies to prevent crashes. This means that you alter your driving to fit the weather conditions, the way you feel, and the actions of other drivers, bicyclists, and pedestrians.

If you hit a parked vehicle or other property, you must leave a note with your name, phone number, and address securely attached to the vehicle or property that you hit.

Warning signs are usually diamond-shaped with black markings on a yellow background. They alert drivers to upcoming hazards. This sign indicates that the divided highway is about to end.

This sign warns of two-way traffic.

Each time you pass another vehicle, there is an increased chance for a collision. If you are moving faster than surrounding traffic, you will have to continue passing others. Drive with the flow of traffic, within the legal speed limit, and pass only as needed.

Yellow lines mark the center of a road used for two-way traffic. A solid yellow centerline indicates that drivers may not cross the line to pass. A broken yellow centerline indicates that drivers may cross the line to pass, but only if passing would not interfere with traffic.

This sign is used with a traffic signal to tell drivers that left-turning traffic does not have the right-of-way and must instead wait for oncoming traffic to clear.

You must stop at a railroad crossing when directed to do so by a flagger or stop sign. Stop when flashing red signals and gates are present and operating.

Emotions can have a great effect on your driving ability. You may not be able to drive well if you are overly worried, excited, afraid, angry, or sad. Stress can lessen your concentration on the task of driving. It is better to wait to drive than to risk driving while you are emotionally unstable.

Lane usage for the motorcyclist is critical. Motorcycles are entitled to the same full lane width as all other vehicles.

Pedestrians should walk on the side of the road facing the traffic in the lane nearest them.

A broken yellow line alongside a solid yellow line means that traffic in the lane next to the broken line may cross the line to pass, while traffic in the lane next to the solid line may not.

You should avoid making any sudden changes in speed or direction when driving on a slippery surface. Reduce your speed on slippery roads and do not use cruise control.

Driving too fast for conditions is a major cause of motor vehicle crashes. Being inattentive to surroundings can cause a driver to collide with other vehicles. Most rear-end collisions are caused by drivers following other vehicles too closely.

When you are turning left from a two-way street, begin in the lane closest to the centerline and start your turn just before the front of your car reaches the center of the intersection. Do not cut the corner. Steering hand-over-hand, turn into the first available legal lane.