Keep your head and eyes up when riding through a work zone. Ride slowly over the grooved pavement.

A properly chosen lane position should provide a number of benefits, including an increased ability to see others and to be seen. It should help you avoid wind blasts, other drivers' blind spots, and surface hazards. Your lane position should discourage other drivers from trying to share your lane and provide you with an escape route, should a hazard arise.

Avoid riding on oil and grease buildup. Because the oily strip in the center of a lane is usually no more than two feet wide, it is often possible to stay to the left or right side of the oil and still be in the center portion of the lane.

In Georgia, you are required to wear a U.S. Department of Transportation-compliant helmet any time you operate a motorcycle.

An appropriate lane position can increase your ability to see and be seen. Being properly positioned in a lane can also help you avoid blasts of wind coming off of surrounding vehicles.

You will get the maximum protection from your helmet if it meets U.S. Department of Transportation (DOT) and state standards, fits snugly all the way around, and has no obvious defects.

On a slippery surface, you should reduce your speed, avoid making sudden moves, and brake by using both brakes.

When approaching a blind intersection, move into the lane position that makes you the most visible to surrounding drivers.

At night, you should always ride at a lower speed than you would under similar conditions during the day. Doing so will give you a better chance of avoiding hazards. Additionally, increase your following distance and be flexible about your lane position.

Following too closely, or "tailgating," can be a major factor in collisions caused by motorcycles. When riding behind another vehicle, maintain a safe following distance.

The best way to deal with a tailgater is to allow them to pass you. Speeding up may only result in them continuing to tailgate you at the higher speed, which is even more dangerous.

To reduce the risk of a collision when riding at night, be sure to reduce your speed and increase your following distance. Use the headlights of vehicles ahead of you to see farther down the road. You should always be flexible about your lane position, especially when riding at night.

The best way to handle tailgaters is usually to change lanes and let them pass. Speeding up may only increase the danger by prompting them to continue tailgating you at the higher speed.

Riding with your headlight activated is the best way to help other road users see your motorcycle. Always be sure your headlight works before starting your trip.

A helmet will provide a rider with the best protection if it meets U.S. Department of Transportation (DOT) standards; fits snugly all the way around; and has no obvious defects, such as cracks, loose padding, or frayed straps.

Reduce your speed before entering a turn. If you take a turn too fast, you may end up veering out of your lane or even off the road.

When approaching a blind intersection, move into the portion of the lane that will bring you into any other driver's field of vision at the earliest possible moment.

Most motorcycle crashes happen in broad daylight. To make yourself more noticeable, wear brightly-colored clothing when riding, even during the daytime.

All riders and passengers are required to wear a helmet when riding a motorcycle, motor-driven cycle, or motorized bicycle.

To be effective, an eye or face shield must be free of scratches; be resistant to penetration; allow clear views to both sides; fasten securely; permit air to pass through to prevent fogging; and allow room for eyeglasses or sunglasses, if needed.

Georgia law requires riders to wear U.S. Department of Transportation-compliant helmets every time they ride. A helmet is a rider's best defense against head and neck injuries in the event of an accident.

Because a motorcycle's brake light is not as noticeable as the brake lights of a car, it is usually a good idea to flash your brake light when slowing or stopping so others will be more likely to notice that you are decelerating. This is particularly important if you are slowing down more quickly than others might expect.

If the rear tire of a motorcycle goes flat, the back of the motorcycle may jerk or sway from side to side. If you experience this movement when riding your motorcycle, you should stop riding and check your tires as soon as possible.

Wearing gloves while riding provides an improved grip and help protect your hands. You should use gloves that are full-fingered and made of a durable material.

Some motorcycles have integrated braking systems that link the front and rear brakes together when the rider applies the rear brake pedal. It is important to consult your owner's manual for details on your specific motorcycle's braking system.