When backing, you should pull forward to reposition your vehicle whenever needed. Drift should be corrected immediately by turning the steering wheel in the direction of the drift.

Avoid being an aggressive driver by being realistic about your travel time, making allowance for delays, maintaining reasonable following distances, and not making hand gestures that could anger another driver.

To help avoid frustration, which can lead to aggressive driving behavior, you should begin a trip with realistic expectations about your travel time. Plan ahead to allow time for potential traffic delays. Other strategies to help prevent aggressive driving behavior include driving an appropriate speed and keeping a reasonable following distance; avoiding making gestures at other drivers; and keeping your hands on the steering wheel.

If your hydraulic braking system will not build up the pressure needed to slow or stop your vehicle, there are a few possible solutions. Try shifting into a lower gear, pumping the brakes, and/or using the emergency brake.

Many large vehicles have curved, convex mirrors. Convex mirrors allow drivers to see a wider area than flat mirrors. However, they also make objects seem smaller and farther away than they really are.

For safe operation, a commercial motor vehicle needs a tread depth of 4/32 of an inch in every major groove on the front tires, and a tread depth of 2/32 of an inch on other tires.

It is essential that you are aware of what is happening on all sides of your vehicle at all times. Scan the road ahead and make regular checks of the mirrors on both sides of your vehicle while you are driving.

Your vehicle pulling to one side or the other while you are braking can indicate trouble with the brakes.

During an inspection, ensure that the wheel bearing/seals are not leaking.

Wheels or rims that have had welding repairs are not safe for use. They should be replaced before the vehicle is taken on the road.

When inspecting your tires, verify that there is at least 4/32 of an inch of tread depth in every major groove on the front tires, and tread depth of at least 2/32 of an inch on the other tires. Tires on the same vehicle should all be the same size.

The emergency air line controls the emergency brakes on a combination vehicle. A loss of air pressure in the emergency line will cause the emergency trailer brakes to activate.

Roads are often especially slippery when it first begins to rain. Rainwater forms a slick film when mixed with oil and grease on the road surface that has not yet washed away.

Drivers who are engaged in conversation with passengers may be distracted from the task of driving. Use extra caution when driving near distracted drivers.

To reduce the risk of developing aggressive driving behavior, you should take measures to manage your stress. One strategy to do this is to simply take a deep breath and accept your circumstances if you realize you will be late to your destination.

To avoid hitting anything behind you, make sure that your vehicle does not roll back when you start from a complete stop.

Be cautious when driving near people who are working on a disabled vehicle on the side of the road. They may be focused on the repair and not paying attention to nearby traffic.

Factors that affect how much liquid is safe to load into your tank include how much the liquid will expand in transit, the weight of the liquid, legal weight limits, and the temperature of the load.

When stopping, you should push the brake pedal down gradually. Braking gradually will help you to maintain proper control of your vehicle.

Always load hazardous materials away from heat sources. Be aware of regulations on explosive or flammable materials that prohibit them from being loaded in cargo spaces with heaters.