MCQGeeks
CBSE
JEE
NTSE
NEET
English
UK Quiz
Quiz
Driving Test
Practice
Games
Quiz
Highway Engineering
Highway Engineering Assessment
Quiz 1
Solution
Q.1.
The alignment of hill roads is divided into how many stages?
a) One
b) Two
c) Three
d) Four
Q.2.
The general route for alignment is selected during __________
a) Reconnaissance
b) Trace cut
c) Detailed survey
d) Detailed project report
Q.3.
The bench marks are fixed during the __________
a) Preliminary survey
b) Reconnaissance
c) Detailed survey
d) After detailed project report
Q.4.
What is the strip length to be surveyed on the straight alignment?
a) 5 m
b) 10 m
c) 15 m
d) 30 m
Q.5.
What is the speed limit on the national highway on hill road in Kmph?
a) 60
b) 50
c) 40
d) 30
Q.6.
What is the minimum right of way distance in exceptional cases?
a) 7 m
b) 5 m
c) 3 m
d) 4 m
Q.7.
The pavement width for a single lane road on a hill is __________
a) 3.5 m
b) 3.75 m
c) 7.0 m
d) 7.5 m
Q.8.
The flatter camber may be provided if the road has a longitudinal gradient greater than __________
a) 1 in 40
b) 1 in 35
c) 1 in 30
d) 1 in 20
Q.9.
The camber for the earth roads should be never less than __________
a) 4%
b) 3.75%
c) 3.5%
d) 3.0%
Q.10.
What is the stopping sight distance for a speed limit ofKmph?
a) 30 m
b) 40 m
c) 60 m
d) 120 m
Q.11.
What is the intermediate sight distance for a speed limit ofKmph?
a) 120 m
b) 60 m
c) 40 m
d) 30 m
Q.12.
What is the maximum super elevation on snow bound area?
a) 3.0%
b) 5.0%
c) 7.0%
d) 10.0%
Q.13.
The minimum sufficient straight distance between the transitional ends for reverse curves is __________
a) 3.0 m
b) 5.0 m
c) 9.0 m
d) 12.0 m
Q.14.
The absolute minimum radius of the curve in snow bound area is __________
a) 60 m
b) 70 m
c) 80 m
d) 90 m
Support mcqgeeks.com by disabling your adblocker.
×
Please disable the adBlock and continue.
Thank you.
Reload page