In a CAD system, you can draw an ellipse by specifying these:

Geometric primitives include shapes such as ________.

Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures __________.

This type of solid has a polygon for a base and triangular lateral faces that intersect at a vertex:

This type of drawing is created to calculate areas, locate property lines, and locate building projects and facilities:

Most architectural firms and mechanical design companies utilize different categories of blocks. These sets of blocks are usually housed in _________.

Architectural drafters generally prefer to use ________ drawings to help illustrate 3-dimensional views of a structure.

When creating a block the drafter needs to pay particular attention to selecting a base point because it determines the __________.

In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.

This material is used in masonry construction, most commonly for ornamental facing:

In an oblique drawing, equally spaced partial circles may be used to show this:

This line pattern is composed of three dashes, one long dash on each end with a short dash in the middle:

When using the descriptive geometry method to create an auxiliary view the drafter should _________.

This is used to indicate that a surface is to be machined:

In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.

If a designer is developing a plan for a project in which the entire part is made out of ¾" thick plywood and he only wants to use one view, he should use the ________ view.

The default position of the UCS icon is positioned at ________ on the Auto-CAD grid.

Spur gear design normally begins with selecting this:

Oblique sections are useful to show this:

This type of section is not in direct projection from the view containing the cutting plane:

Dimension text is generally placed above the ________ line.

A line with a tapering width can be easily created by using the ________ tool.

When the receding lines are true length, and the projectors are at 45 degrees to the plane of projection, the oblique drawing is called this:

The first step in creating a traditional technical drawing is to ________.

This is the term for the range of tightness or looseness resulting from the allowances and tolerances in mating parts:

The offset distance for the width (front to back) distance of the auxiliary view is the same distance of the ________ in the top view.

The lines used to create the auxiliary view should appear as ________ in the finished view.

This is the intersection of the ground plane with the picture plane:

A cylinder can be created by drawing a rectangular shape then the ________ tool.

When adding dimensions to an auxiliary view it will be necessary to use the ________ tool.