Q.1.
Some of the common terms used to describe technical drawing include:
Q.2.
In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in feet and inches:
Q.3.
How can the drafter prevent Auto-CAD from placing or stacking another center mark on a circle when adding a diameter dimension to it?
Q.4.
When creating an isometric drawing in Auto-CAD the drafter can utilize the Dynamic Input and Polar Coordinate system to place both vertical and horizontal lines. A line created from one point 3 inches at 180 degrees would be a ________ line.
Q.5.
This type of structural steel drawing shows all dimensions necessary for fabrication:
Q.6.
These maps are used in planning installations of trees, shrubbery, drives, and other garden features:
Q.7.
The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
Q.8.
This is the measured size of a finished part:
Q.9.
Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole.
Q.10.
A ________ section allows the drafter to create a Cutting Plane line which is not in a straight line across the part.
Q.11.
A secondary auxiliary view is a projection off of the __________.
Q.12.
Perspective drawings are classified according to their number of these features:
Q.13.
Technical drawings typically serve one of three purposes:
Q.14.
This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
Q.15.
A ________ is the person responsible for verifying that the drawings in a project set are free of mistakes.
Q.16.
This is the smallest diameter of a screw thread:
Q.17.
This is used in drawings to represent the edge of a solid object:
Q.18.
The ________ dimension tool will place the length of an angled line.
Q.19.
In this type of projection, each of the axes has different ratios of foreshortening:
Q.20.
The UCS icon represents the intersection of the __________.
Q.21.
Architectural dimensioning standards allow for the placement of dimensions inside the floor plan. These inside dimensions locate interior __________.
Q.22.
This type of auxiliary view is projected onto a plane that is perpendicular to one of the principal planes of projection:
Q.23.
There are two main types of projection:
Q.24.
Dimensions are used on the elevation plan to describe ________.
Q.25.
Generally, the units used on an architectural drawing are set to __________.
Q.26.
To insure that everyone understands what the electrical symbols represent it is customary to include a ________ on the electrical sheet.
Q.27.
This allows the performance of structures to be analyzed and tested efficiently, accurately, and quickly:
Q.28.
When lines intersect on a drawing at angles of this many degrees, it is customary not to dimension the angle:
Q.29.
When positioning this feature of perspective projection, the centerline of the cone of visual rays should be directed toward the approximate center of the object:
Q.30.
The building construction industry relies on sets of ________ drawings to construct homes and commercial buildings.