MCQ Questions
Q.1.
Which key combination allows a user to abort setup mode?
  • 0%
    metric
  • 0%
    127.0.0.1
  • 100%
    network portion
  • 0%
    Ctrl-C
Q.2.
A router may have to fragment a packet when forwarding it from one medium to another medium that has a smaller _______________ .
  • 0%
    MTU
  • 0%
    Nat/Pat
  • 0%
    flash
  • 0%
    metric
Q.3.
If there are two or more possible routes to the same destination, the _______________ is used to determine which route is used in the routing table.
  • 0%
    Ctrl-C
  • 0%
    metric
  • 0%
    MTU
  • 0%
    Nat/Pat
Q.4.
Which portion of the network layer address does a router use to forward packets?
  • 0%
    Ctrl-C
  • 0%
    network portion
  • 0%
    127.0.0.1
  • 0%
    Time-to-live
Q.5.
During the boot process, where will the router bootstrap program look for the IOS image by default?
  • 0%
    Ctrl-C
  • 0%
    flash
  • 0%
    metric
  • 0%
    Time-to-live
Q.6.
How does the network layer use the MTU value?
  • 0%
    R1: G0/0 and S0/0/0R2: G0/1 and S0/0/0
  • 0%
    The MTU is passed to the network layer by the data link layer.
  • 0%
    The default gateway address is used to forward packets originating from the switch to remote networks.
  • 0%
    *providing end devicess with a unique network identifier*directing data packets to destination hosts on other networks.
Q.7.
What are two functions that are provided by the network layer?
  • 0%
    The MTU is passed to the network layer by the data link layer.
  • 0%
    Ctrl-C
  • 0%
    *providing end devicess with a unique network identifier*directing data packets to destination hosts on other networks.
  • 0%
    The default gateway address is used to forward packets originating from the switch to remote networks.
Q.8.
Refer to the exhibit. Fill in the blank.A packet leaving PC-1 has to traverse _______ hops to reach PC-4.​
  • 0%
    192.133.219.1
  • 0%
    MTU
  • 0%
    flash
  • 0%
    3
Q.9.
Refer to the exhibit. Using the network in the exhibit, what would be the default gateway address for host A in the 192.133.219.0 network?
  • 0%
    Time-to-live
  • 0%
    127.0.0.1
  • 0%
    network portion
  • 0%
    192.133.219.1
Q.10.
Open the PT activity. Perform the tasks in the activity instructions and then answer the question.Which interfaces in each router are active and operational?
  • 0%
    R1: G0/0 and S0/0/0R2: G0/1 and S0/0/0
  • 0%
    metric
  • 0%
    flash
  • 0%
    flow label
Q.11.
The acronym _______________ is used to define the process that allows multiple devices to share a single routable IP address.
  • 0%
    metric
  • 0%
    flow label
  • 0%
    Nat/Pat
  • 0%
    MTU